Expliquewatch · explain · prove

← all topics

Cnc torna programlama dersi

7 lessons · 4:19 · updated 9/12/2026
3 of the lessons are not in Turkish; each one says which language it is in.

Watch them in order, then explain the topic in your own words below.

Nobody with subject knowledge has checked this course yet. It was put together automatically.

What you will do in this course

  • CNC Torna Tanıtımı
  • Cimco Edit Programlama
  • Makro Program Oluşturma
  • Devir ve İlerleme Hesaplama
  • Dış Çap Arkı Açma
  • Programı Karta Yükleme
  • G81 Delik Açma
0 / 7 lessons watched

Getting started

1 lessons · short section, not a full path on its own

1. CNC TORNA OPERATÖRLÜĞÜ ÖĞRENİYORUM - 1

CNC Torna Tanıtımı

ARSLAN AKADEMİ · watch the original · 1:23

Now you explain it

Close what you watched and explain the topic in your own words in 30 seconds. What you can explain is what you have learned. You are marked against this course's lessons and nothing beyond them.

Explain how you would do this: Getting started — CNC Torna Tanıtımı.

You are judged on these, and nothing else in the course:

  • CNC Torna Tanıtımı

Doing it properly

4 lessons · short section, not a full path on its own

1. 8 Cimco Edit Programı İle CNC Torna tezgahında parça kesme CAM Programlama

in English

Makine Eğitimi · watch the original · 1:13

2. Cnc Torna Ve Freze İçin Devir İlerleme Hesabı

Devir ve İlerleme Hesaplama

Cnc uzman op. Ümit Çakar · watch the original · 0:07 · a taster

3. CNC Torna Tezgahına Karttan Program Aktarma Adımları , Hızlı ve Verimli Yükleme, CNC Torna Eğitimi

Programı Karta Yükleme

Makine Meslek · watch the original · 0:52

4. How to Use G81 for Drilling in CNC Programming, Drilling with G81 code on the CNC lathe,CNC TRAINING

in English

G81 Delik Açma

Makine Meslek · watch the original · 0:06 · a taster

Now you explain it

Close what you watched and explain the topic in your own words in 30 seconds. What you can explain is what you have learned. You are marked against this course's lessons and nothing beyond them.

Explain how you would do this: Doing it properly — Programı Karta Yükleme.

You are judged on these, and nothing else in the course:

  • Cimco Edit Programlama
  • Devir ve İlerleme Hesaplama
  • Programı Karta Yükleme

Going deeper

2 lessons · short section, not a full path on its own

1. Cnc Torna makro program ile yapımı

Makro Program Oluşturma

Koddan Talaşa · watch the original · 0:15 · a taster

2. How to program outer diameter arc groove?

in English

Dış Çap Arkı Açma

Leichman Automation · watch the original · 0:23

Now you explain it

Close what you watched and explain the topic in your own words in 30 seconds. What you can explain is what you have learned. You are marked against this course's lessons and nothing beyond them.

Explain how you would do this: Going deeper — Dış Çap Arkı Açma.

You are judged on these, and nothing else in the course:

  • Makro Program Oluşturma
  • Dış Çap Arkı Açma